Revisions 0 to 10 in in which 'main.c' was changed are listed below. These revisions are ancestors of the revision [9142f333..]. The "diff" links listed with each revision will show changes in 'main.c' between that revision and [9142f333..].

3642 days ago: Bye bye Wii Motion Plus, hello MPU6050. Also, increase control loop
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: Bye bye Wii Motion Plus, hello MPU6050. Also, increase control loop
to 200Hz, add SD card logging, and a number of other changes.
Date: Tue, 06 May 2014 21:03:48 GMT
3988 days ago: Firmware changes to match rewired control board.
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: Firmware changes to match rewired control board.
This is a bit more difficult than just reassigning pins as the usage
of the timers has changed to the point of using 16 bit timers where 32 bit
timers would have been ideal. This makes the use of the prescaler necessary,
and we need to cope with a different prescaler value being used on different
timers.
Date: Sat, 25 May 2013 19:24:39 GMT
4154 days ago: Add ESC calibration mode, activated by holding down the button at startup.
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: Add ESC calibration mode, activated by holding down the button at startup.
Date: Mon, 10 Dec 2012 23:20:14 GMT
4156 days ago: Limit integral windup, some new PID values and linearise thrust.
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: Limit integral windup, some new PID values and linearise thrust.
Date: Sat, 08 Dec 2012 12:31:17 GMT
4233 days ago: Improve handling of arming, providing LED blink codes if the arming fails.
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: Improve handling of arming, providing LED blink codes if the arming fails.
Also, implement a software watchdog to make sure that the main real-time
modules are actually being run. Provide a panic facility, also giving blink
codes to indicate the panic reason.
Date: Sat, 22 Sep 2012 12:08:07 GMT
4256 days ago: Let's have an LED driving module so that we can output different patterns for
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: Let's have an LED driving module so that we can output different patterns for
status indications etc.
Date: Thu, 30 Aug 2012 14:04:33 GMT
4256 days ago: Lots of development of new features. Radio input, motor output, PID control
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: Lots of development of new features. Radio input, motor output, PID control
loops, boot-time initialisation, option to run without attached UART.
And.. it flies!
Date: Thu, 30 Aug 2012 12:42:38 GMT
4556 days ago: Take interleaved accelerometer and gyro readings, and integrate them into
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: Take interleaved accelerometer and gyro readings, and integrate them into
a single attitude estimation.
A bunch of debug stuff, too.
Date: Fri, 04 Nov 2011 12:47:16 GMT
4584 days ago: Track gyro using a DCM.
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: Track gyro using a DCM.
This brings in an implementation of some general matrix manipulation routines,
not all of which are used at teh moment.
Output the DCM on the UART at 50Hz for the host to display it usefully.
Date: Fri, 07 Oct 2011 23:39:28 GMT
4709 days ago: No point in calling event_dispatch() from the menu any more.
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: No point in calling event_dispatch() from the menu any more.
Date: Sat, 04 Jun 2011 20:57:13 GMT