Revisions 0 to 10 in in which 'Makefile' was changed are listed below. These revisions are ancestors of the revision [be147b11..]. The "diff" links listed with each revision will show changes in 'Makefile' between that revision and [be147b11..].

4713 days ago: Limit integral windup, some new PID values and linearise thrust.
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: Limit integral windup, some new PID values and linearise thrust.
Date: Sat, 08 Dec 2012 12:31:17 GMT
4790 days ago: Improve handling of arming, providing LED blink codes if the arming fails.
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: Improve handling of arming, providing LED blink codes if the arming fails.
Also, implement a software watchdog to make sure that the main real-time
modules are actually being run. Provide a panic facility, also giving blink
codes to indicate the panic reason.
Date: Sat, 22 Sep 2012 12:08:07 GMT
4813 days ago: Let's have an LED driving module so that we can output different patterns for
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: Let's have an LED driving module so that we can output different patterns for
status indications etc.
Date: Thu, 30 Aug 2012 14:04:33 GMT
4813 days ago: Lots of development of new features. Radio input, motor output, PID control
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: Lots of development of new features. Radio input, motor output, PID control
loops, boot-time initialisation, option to run without attached UART.
And.. it flies!
Date: Thu, 30 Aug 2012 12:42:38 GMT
5113 days ago: Take interleaved accelerometer and gyro readings, and integrate them into
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: Take interleaved accelerometer and gyro readings, and integrate them into
a single attitude estimation.
A bunch of debug stuff, too.
Date: Fri, 04 Nov 2011 12:47:16 GMT
5141 days ago: Track gyro using a DCM.
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: Track gyro using a DCM.
This brings in an implementation of some general matrix manipulation routines,
not all of which are used at teh moment.
Output the DCM on the UART at 50Hz for the host to display it usefully.
Date: Fri, 07 Oct 2011 23:39:28 GMT
5267 days ago: Make total stack size available as a symbol
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: * Make total stack size available as a symbol
* Implement SWI handler to enable/disable interrupts
* Implement event system to deal with kicking non-interrupt code
Date: Fri, 03 Jun 2011 21:22:01 GMT
5280 days ago: Move UART code into its own file
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: * Move UART code into its own file
* Set up vectored interrupt controller
* Set up timer interrupt
Date: Sat, 21 May 2011 22:26:19 GMT
5283 days ago: More warnings courtesy of -Wextra
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: More warnings courtesy of -Wextra
Date: Wed, 18 May 2011 14:47:56 GMT
5283 days ago: Allow COPTIM to be set outside Makefile
view file | diff | revision info | browse files
Author: gavan@coolfactor.org
Changelog: * Allow COPTIM to be set outside Makefile
* Use -Wall -Werror
* Fix some warnings
Date: Wed, 18 May 2011 09:55:02 GMT