The unified diff between revisions [bfc9e27f..] and [dc88787e..] is displayed below. It can also be downloaded as a raw diff.

This diff has been restricted to the following files: 'stick.c'

#
# old_revision [bfc9e27f5c40da31ae4269394aaf0545e5856a70]
# new_revision [dc88787ecd1d574feba045763baed2a7651ff33d]
#
# patch "stick.c"
#  from [b9e45330f5b727359eb7de7892d2d9e20543cdb0]
#    to [2f04655a185f179c9e8469822e089c308cb3a220]
#
============================================================
--- stick.c	b9e45330f5b727359eb7de7892d2d9e20543cdb0
+++ stick.c	2f04655a185f179c9e8469822e089c308cb3a220
@@ -15,24 +15,25 @@
 #include "status.h"
 #include "watchdog.h"
 #include "log.h"
+#include "config.h"
 
 #define TWO_PI 6.28318531f
 #define PI 3.14159265f
 
-#define MIN_X 8720
-#define MAX_X 23800
-#define CENTRE_X 16260
+#define MIN_X config.stick.timing.x.min
+#define MAX_X config.stick.timing.x.max
+#define CENTRE_X config.stick.timing.x.centre
 
-#define MIN_Y 8720
-#define MAX_Y 23800
-#define CENTRE_Y 16260
+#define MIN_Y config.stick.timing.y.min
+#define MAX_Y config.stick.timing.y.max
+#define CENTRE_Y config.stick.timing.y.centre
 
-#define MIN_Z 8720
-#define MAX_Z 23800
-#define CENTRE_Z 16300
+#define MIN_Z config.stick.timing.z.min
+#define MAX_Z config.stick.timing.z.max
+#define CENTRE_Z config.stick.timing.z.centre
 
-#define MIN_THR 9720
-#define MAX_THR 23750
+#define MIN_THR config.stick.timing.throttle.min
+#define MAX_THR config.stick.timing.throttle.max
 
 #define MIN_REAL_THR 8720
 
@@ -46,11 +47,11 @@
  */
 
 /* Full scale is a roll/pitch angle of 30 degrees from the vertical */
-#define SCALE_X (TWO_PI*30.0/360.0 / (MAX_X-CENTRE_X))
-#define SCALE_Y (TWO_PI*30.0/360.0 / (MAX_Y-CENTRE_Y))
+#define SCALE_X (TWO_PI*config.stick.sensitivity.x/360.0 / (MAX_X-CENTRE_X))
+#define SCALE_Y (TWO_PI*config.stick.sensitivity.y/360.0 / (MAX_Y-CENTRE_Y))
 
 /* Full scale is a complete rotation in one second */
-#define SCALE_Z (TWO_PI / (MAX_Z-CENTRE_Z))
+#define SCALE_Z (TWO_PI*config.stick.sensitivity.z/360.0 / (MAX_Z-CENTRE_Z))
 
 /* 0 is min throttle, 1 is max throttle */
 #define SCALE_THROTTLE (1.0f/(MAX_THR - MIN_THR))
@@ -59,9 +60,9 @@ unsigned int stick_counter;
 
 unsigned int stick_counter;
 
-void stick_update(float x, float y, float z)
+void stick_update(vec3f stick)
 {
-	float tz = delta_t * z;
+	float tz = delta_t * stick.z;
 
 	stick_yaw += tz;
 
@@ -72,16 +73,16 @@ void stick_update(float x, float y, floa
 	    stick_yaw -= TWO_PI;
 
 #if 0
-	z = stick_yaw;
+	stick.z = stick_yaw;
 #endif
 
-	x = sine(x);
-	y = sine(y);
+	stick.x = sine(stick.x);
+	stick.y = sine(stick.y);
 #if 0
-	z = 1.0/fisqrt(1-x*x-y*y);
+	stick.z = 1.0/fisqrt(1-stick.x*stick.x-stick.y*stick.y);
 #endif
 
-	dcm_attitude_error(x, y, z);
+	dcm_attitude_error(stick);
 }
 
 #ifdef STICK_DEBUG_CALIBRATE
@@ -168,9 +169,7 @@ void stick_input(void) {
 	watchdog_kick(WATCHDOG_STICK);
 
 	/* So the controls are back to front. Let's fix that. */
-	x = -x;
-	y = -y;
-	z = -z;
+	vec3f stick = {-x, -y, -z};
 
 #if 0
 	if ((stick_counter % 100) == 0) {
@@ -181,10 +180,10 @@ void stick_input(void) {
 #endif
 
 #if 1
-	stick_update(x, y, z);
+	stick_update(stick);
 #else
 	if ((stick_counter % 100) == 0)
-		stick_update(x, y, z);
+		stick_update(stick);
 #endif
 
 /*